After two years of research and development we are bringing Lean Trucks to the world, a new longboard truck that we are going to use on all our Long Island Boards completes.
INVERTED KINGPIN TRUCK – 150MM & 180MM HANGER
Lean Trucks permits two different hanger sizes that you can choose from, depending on your board’s width and the turn/grip/stability balance you seek.
The bushing seats have been designed to bring you a lineal turn. The hanger’s front side has an open bushing seat, allowing a wide lean for close turns and carves. The back side of the hanger has a closed bushing seat though, providing control and stability when most needed.
2MM RAKE AXLE
Both hangers include a 2mm Rake Axle, allowing different set up options. The Rake offers a non-centered axle, so you will feel more or less transmission depending on the way you place the hanger.
50º BASEPLATE
The Baseplate of the truck is designed to use a 50º Kingpin, which brings wide and progressive turns while keeping the stability you need at high speeds.
2 WHEELBASE POSITIONS
Eight holes for two different wheelbase positions, so you will be able to get even more set up options for your ride.
92A CONE & BARREL BUSHINGS
All the Lean Trucks mount 92A Red Cone and Barrel Bushings, manufactured with our special High Rebound Formula. We use standard barrel and cone bushing sizes, which allows you to use and try different bushing set-ups.
After two years of research and development we are bringing Lean Trucks to the world, a new longboard truck that we are going to use on all our Long Island Boards completes.
INVERTED KINGPIN TRUCK – 150MM & 180MM HANGER
Lean Trucks permits two different hanger sizes that you can choose from, depending on your board’s width and the turn/grip/stability balance you seek.
The bushing seats have been designed to bring you a lineal turn. The hanger’s front side has an open bushing seat, allowing a wide lean for close turns and carves. The back side of the hanger has a closed bushing seat though, providing control and stability when most needed.
2MM RAKE AXLE
Both hangers include a 2mm Rake Axle, allowing different set up options. The Rake offers a non-centered axle, so you will feel more or less transmission depending on the way you place the hanger.
50º BASEPLATE
The Baseplate of the truck is designed to use a 50º Kingpin, which brings wide and progressive turns while keeping the stability you need at high speeds.
2 WHEELBASE POSITIONS
Eight holes for two different wheelbase positions, so you will be able to get even more set up options for your ride.
92A CONE & BARREL BUSHINGS
All the Lean Trucks mount 92A Red Cone and Barrel Bushings, manufactured with our special High Rebound Formula. We use standard barrel and cone bushing sizes, which allows you to use and try different bushing set-ups.